Skip to content
2.0.1.1 Scope
2.0.1.2 General
2.0.1.3 Connection to Grounded System
2.0.1.4 Neutral Conductors
2.0.1.6 Means of Identifying Grounded Conductors
2.0.1.7 Use of Insulation of a White or Gray Color or with Three Continuous White or Gray Stripes
2.10.1 General Provisions
2.10.2 Branch-Circuit Ratings
2.10.3 Required Outlets
2.20.1 General
2.20.2 Branch Circuit Load Calculations
2.20.3 Feeder and Service Load Calculations
2.20.4 Optional Feeder and Service Load Calculations
2.20.5 Farm Load Calculations
2.25.1 General
2.25.2 Buildings or Other Structures Supplied by a Feeder(s) or Branch Circuit(s)
2.25.3 Over 1000 Volts
Article 2.30 – Services
2.30.1 General
2.30.2 Overhead Service Conductors
2.30.3 Underground Service Conductors
2.30.4 Service-Entrance Conductors
2.30.5 Service Equipment – General
2.30.6 Service Equipment – Disconnecting Means
2.30.5 Service Equipment – Overcurrent Protection
2.30.5 Services Exceeding 1000 Volts, Nominal
Article 2.40 – Overcurrent Protection
2.40.1 General
2.40.2 Location
2.40.3 Enclosures
2.40.4 Disconnecting and Guarding
2.40.5 Plug Fuses, Fuseholders, and Adapters
2.40.6 Cartridge Fuses and Fuseholders
2.40.7 Circuit Breakers
2.40.8 Supervised Industrial Installations
2.40.9 Overcurrent Protection Over 1000 Volts, Nominal
Article 2.50 – Grounding and Bonding
2.50.1 General
2.50.2 System Grounding
2.50.3 Grounding Electrode System and Grounding Electrode Conductor
Article 2.80 – Surge Arresters, Over 1000 Volts
Article 2.85 – Surge-Protective Devices (SPD’s), 1000 Volts or Less
Article 2.90 – Protection Against Lightning