List of Common Electrical Equipment Symbols in PEC 2017.
Continue readingCategory: PEC

What should be the contents of my Electrical Plan? -Based on PEC 2017
Philippine Electrical Code indicated the required contents on electrical plans. This is under Article 1.3.
Continue reading
Significant Changes to Philippine Electrical Code (PEC) 2017 Edition
The new edition of the PEC 2017 was based on the 2017 National Electrical Code. The primary objective of the
Continue readingPEC Example D1
Single Family Dwelling Unit, Up to 50 sqm Floor Area with Load not Exceeding 3,680 VA. The dwelling unit has
Continue readingPEC 2017 – Article 2.25
This article covers requirements for outside branch circuits and feeders run on or between buildings, structures, or poles on the premises; and electrical equipment and wiring for the supply of utilization equipment that is located on or attached to the outside of buildings, structures, or poles.
Continue readingPEC 2017 – Article 2.20
This article provides requirements for calculating branch-circuit, feeder, and service loads. Part 2.20.1 provides general requirements for calculation methods. Part 2.20.2 provides calculation methods for branch-circuit loads. Parts 2.20.3 and 2.20.4 provide calculation methods for feeder and service loads. Part 2.20.5 provides calculation methods for farm loads.
Continue readingPEC 2017 – Article 2.15
This article covers the installation requirements, overcurrent protection requirements, minimum size, and ampacity of conductors for feeders.
Continue readingPEC 2017 – Article 2.10
This article covers general requirements for examination, approval, installation and use, access to and spaces about electrical conductors and equipment; enclosures intended for personnel entry; and tunnel installations.
Continue readingPEC 2017 – Article 2.0
This article covers general requirements for examination, approval, installation and use, access to and spaces about electrical conductors and equipment; enclosures intended for personnel entry; and tunnel installations.
Continue readingPEC 2017 – Article 1.10
This article covers general requirements for examination, approval, installation and use, access to and spaces about electrical conductors and equipment; enclosures intended for personnel entry; and tunnel installations.
Continue reading