This article covers general requirements for examination, approval, installation and use, access to and spaces about electrical conductors and equipment; enclosures intended for personnel entry; and tunnel installations.
Continue readingAuthor: admin
Engr. Jared Cuchapin is a registered electrical engineer from the Philippines. He currently works at Davao Light and Power Co, Inc. , the 3rd largest distribution utility in the Philippines. His professional expertise is in the design & implementation of power lines and power substations ranging from 240V-138kV. He loves to share his experience and resources to other professionals.
PEC 2017 – Article 1.3
Article 1.3 – ELECTRICAL PLANS AND SPECIFICATIONS 1.3.1 General 1.3.1.1 Drawing Sheet Sizes. (A) Electrical plans and drawings shall be
Continue readingPEC 2017 – Article 1.2
Article 1.2 – PERMITS AND INSPECTION CERTIFICATES 1.2.1 Electrical Permits 1.2.1.1 Electrical Permit Needed Before Work is Started. Before starting
Continue readingPEC 2017 – Article 1.1
Article 1.1.1 – DEFINITIONS 1.1.1.1 Scope This article contains only those definitions essential to the proper application of this Code.
Continue readingFundamental Concepts of Sag-Tension Relationship in Transmission and Distribution Lines
When a conductor is suspended between two supports and carrying its own uniform weight, the curve formed is called a catenary.
Continue readingPEC 2017 – Article 1.0
Article 1.0-INTRODUCTION 1.0.1.1 Purpose (A) Practical Safeguarding. The purpose of this Code is the practical safeguarding of persons and property
Continue reading
DILG Memorandum: Electrical Plans must have Short Circuit and Voltage Drop Calculation
Department of Interior and Local Government issued Memorandum Circular 2016-23 dated February 17, 2016 which reiterates certain provisions of the
Continue reading