In this example calculation of angled pole structure, the objective is to apply NESC 2017 rules to generate the loading
Continue reading
Author: admin
Engr. Jared Cuchapin is a registered electrical engineer from the Philippines. He currently works at Davao Light and Power Co, Inc. , the 3rd largest distribution utility in the Philippines. His professional expertise is in the design & implementation of power lines and power substations ranging from 240V-138kV. He loves to share his experience and resources to other professionals.
Transmission Line Failure Due To Increase In Conductor Tension
This article is a primer to Example 2: Pole Loading Analysis of the Angled Structure based on NESC 2017. Also,
Continue readingPEC 2017 – Appendix A Electrical Symbols
List of Common Electrical Equipment Symbols in PEC 2017.
Continue reading
Example 1: Pole Loading Analysis of Tangent Structure based on NESC 2017
In this example calculation of tangent pole structure, the objective is to apply NESC 2017 rules to generate the loading
Continue reading
Loading Analysis of Transmission and Distribution Structures based on NESC 2017
National Electrical Safety Code (NESC) Part 2 aimed for the practical safeguarding of persons during installation, operation, or maintenance of
Continue reading
10 Measurable Benefits of Hot-Dip Galvanizing Transmission Structures
Corrosion protection and finish are important considerations when designing a line using steel structures. The most commonly used corrosion protection
Continue reading
How to become a PEE? -With Sample TER
Guide for those aspiring to upgrade as Professional Electrical Engineer with downloadable sample Technical Engineering Report.
Continue reading
22 Consumer Rights – Magna Carta for Residential Electricity Consumers as Amended
Aside from the basic rights of the consumers there are 22 specific rights stipulated. However, this magna carta is only
Continue reading
What should be the contents of my Electrical Plan? -Based on PEC 2017
Philippine Electrical Code indicated the required contents on electrical plans. This is under Article 1.3.
Continue reading
How to Use Sag Template for Tower Spotting – Part 3
Tower or Structure spotting is a term used for the process of determining the optimum location, height, and type of
Continue reading